MPP4201 ? mpp4205, mpl4700 microsemi microwave products 75 technology drive, lowell, ma. 01851, 978-442-5600, fax: 978-937-3748 page 1 control devices ? mmsm pin and limiter diodes tm ? www. microsemi .com rohs com p liant description this series of surface mount pin and limiter diodes utilize new and unique monolithic mmsm technology. the technology is a package/device integration accomplished at the wafer fabrication level. since the cathode and anode interconnections utilize precision photolithographic techniques rather than wire bonds, parasitic package inductance is tightly controlled. the package parasitics provide smooth non-resonant functionality through x band. this series of devices meets rohs requirements per eu directive 2002/95/ec. applications the mpp4000 series of pin diodes can be used in rf circuits as an on/off element, as a switch, or as a current controlled resistor in attenuators extending over the frequency range from uhf through x band. switch applications include high speed switches (ecm systems), tr switches channel or antenna selection switches (telcom and wlan applications), duplexers (radar) and digital phase shif ters (phased arrays). these diodes are also used as passive and active limiters for low to moderate rf power levels. attenuator type applications include amplitude modulators, agc attenuators and power levelers. the mpl4700 / mpl4701 series of limiter diodes are design for low to medium power receiver protection. the typical leakage output power for the mpl4701 is +20 dbm versus +24 dbm for the mpl4700. absolute maximum ratings at 25o c (unless otherwise specified) rating symbol value unit maximum leakage current @80% of minimum rated v b i r 0.5 ua operating temperature t op -55 to +150 oc storage temperature t stg -65 to +150 oc important: for the most current data, visit: www. micro semi .com specifications are subject to change. consult factor y for latest information . these devices are esd sensitive and must be handled use using esd precautions. key features ? up to 10w incident rf power handling ? low parasitics l p = 0.02nh typical c p = 0.04pf typical ? broadband performance through x-band ? available on tape & reel or on film frame for pick & place ? small, sod 323 footprint ? rohs compliant 1 1- these devices are supplied with gold terminations. applications/benefits ? receiver protection circuits ? broadband switching ? economy switching ? rf attenuators mpp4200, mpl4700 copyright ? 2006 rev: 2009-01-19
MPP4201 ? mpp4205, mpl4700 microwave products 75 technology drive, lowell, ma. 01851, 978-442-5600, fax: 978-937-3748 page 2 control devices ? mmsm pin and limiter diodes tm ? www. microsemi .com rohs com p liant . device electrical parameters @ 25 ?c (unless otherwise specified) model number v b (v) i r =10 a (min) c t (pf) 1 @-10v (max) r s ( ? ) 2 @ 0.01 ma (typ) r s ( ? ) 2 @1 ma r s ( ? ) 2 @10 ma (max) r s ( ? ) 2 @20 ma (max) t l (typ) application MPP4201 70 0.20 2.5 150 switching / attenuation mpp4202 50 0.15 2.8 50 switching mpp4203 50 0.10 3.0 50 economy switching mpp4204 25 0.15 2.0 20 switching mpp4205 70 0.15 250 7-16 5.0 150 attenuation mpl4700 25 0.15 2.0 a 20 receiver protection mpl4701 15 0.20 2.5 a 10 receiver protection notes 1- capacitance is measured at f = 1 mhz. 2- series resistance (r s ) is measured at f = 100 mhz. devices are mounted in a package suitable for testing. a. r s is measured at 1ghz for the mpl4700 and mpl4701 devices. electricals m icrosemi copyright ? 2006 rev: 2009-01-19
MPP4201 ? mpp4205, mpl4700 microsemi microwave products 75 technology drive, lowell, ma. 01851, 978-442-5600, fax: 978-937-3748 page 3 control devices ? mmsm pin and limiter diodes tm ? www. microsemi .com rohs com p liant typical rs vs if @ 25 ? c mpp4202/mpp4203 MPP4201 mpp4204 mpp4205 0.10 1.00 10.00 100.00 1000.00 10000.00 0.001 0.010 0.100 1.000 10.000 100.000 i f (ma) rs @ 100 mhz (ohms) package style 206 elec / mech copyright ? 2006 rev: 2009-01-19
|
